Posted by Tom in TN on October 13, 2010 at 15:24:58 from (68.52.216.19):
In Reply to: Hello! New here! posted by Hoosierhog2 on October 13, 2010 at 11:55:19:
Hoosierhog2,
Here's a couple of things that come to mind:
1. How deep are you plowing? If you're going more than about 4 - 6 inches the sod that you're turning over could end up pretty bumpy.
2. How fast are you going? If your ground speed is varying, you could end up with some sod that is turned over and some that isn't turned over completely.
3. What kind of ground are you plowing and how long has it been since it was last plowed? Clay or highly compacted soil will turn over very unevenly.
4. Are there roots in the ground from the trees? If so, they too will make the turn of the soil uneven.
Those cool photos of neatly plowed ground with straight furrows are usually in fields that are consistently plowed, disked, and dragged year after year so the soil turns pretty evenly.
You might not be doing anything "wrong", it might just be the conditions you're working in.
Good luck. Be patient. Disk it more than once to help smooth out the roughness. Drag it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers WD45 (Gas Version) - by Staff. Beginning production in 1953, the WD45 had the same general look as the WD tractor which was produced earlier - but was much more powerful. This was due to the new 4-cylinder "Power Crater" gasoline engine with a 4 x 4-1/2 inch bore and stroke. Some people feel this was one of the most significant tractors offered by Allis-Chalmers in those days. Nothing in its weight or power class could match its performance. In 1954 they began offering the WD45 with the new "Snap-Coupler&quo
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
