Posted by Brad Gyde on September 18, 2010 at 20:55:12 from (68.28.137.231):
Hi guys,
I been searching in the archives, because I know this has came up before.. but can't seem to find it.
I'm wondering is there a "right" way to wire a one wire delco alternator up?
It's going onto a 560 diesel that will be used nearly daily, and this is what the owner wants, so I'm not asking many questions, just trying to help him get it all doctored up..
The only one I ever did, I just ran a wire to the battery post on the starter solenoid, and has worked fine for 3 years of little use, and don't seem to draw the battery down (sits for 11 months out of the year, starts right up when the time comes)
I also know I have to remove the old VR and some of the old wiring, but is there anything else I have to do? He has the alternator already "mocked" up, and has it ready to go, just needs wiring done to finish it up.. I just want to be sure we do it right and remove the right things, and so that the ammeter works like it should (and don't draw the battery and stuff down)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Case VA Series - by Staff. V, VC, VI and VO). Althouh the Case VA looked much like the V, it shared no major components with its predecessor. Except for military units, the production of the Case VA was interrupted in July of 1942 due to World War II. It resumed again in 1944 and continued until 1953. It started up briefly later on in 1953 and continued on a very limited basis until 1956. The VA Series included the following models: VA: Fixed front wheel tread VAC:
... [Read Article]
Latest Ad:
Massey Ferguson model 65 diesel tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
