Posted by Fixerupper on July 31, 2010 at 18:03:43 from (207.199.205.40):
In Reply to: Wagon Hoist posted by Bill in IL on July 31, 2010 at 12:06:22:
Is this on a 12' wagon? I have midwest hoists on two 10' wagons and two 12 footers, and I'm thinking the 12 footers have longer cylinders in the hoist. Here in northwest Iowa Midwest hoists used to be all over the place so I'm sure there are a lot of them laying around. Today farmers are buying the barge wagons removing the box and hoist and using the running gear for a header trailer. A machinery jockey or consignment auction might be a place to look if you don't need a fix right away.
Is the rod bent? If it isn't bent too bad you can straighten it reasonably well and it'll still work. It's a single acting cylinder so you don't have to worry about messing up a rod seal. If the weld blew out at the base of the cylinder you can re weld it. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Machine Shops - by Curtis Von Fange. It is a story that repeats itself countless times. In the process of rebuilding a particular section of the tractor there is a broken part for which a replacement cannot be found. The parts houses find in their catalogue that it is unavailable. The dealerships call it a discontinued part. Salvage yards define it as hard to find or, even worse, rare. Everyone on the NET says, 'what is it?' But don�t despair there is another avenue that can be used to get that piece repaired. The local mach
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
