Posted by Adirondack case guy on July 27, 2010 at 19:15:49 from (67.252.92.228):
In Reply to: 931 case pto shaft posted by gene pesch on July 27, 2010 at 18:47:57:
If this is a CK with DOM 3pt. It's pretty easy. Remove drawbar- remove bolts suporting drawbar support bracket and let it swing down. Drain trans. 17 gal. Disconnect pto lever from splined shaft, remove all bolts from housing and pull it away. Broken shaft does not allow you to put a peice of pipe over it to balance the housing so removing it may be aukward and the hyd pickup screen could be damiged if not carful.Once the PTO housing is removed you need to remove the inner casting suporting the front of the PTO gear train and replace the shaft. A 4hr. job for an experienced tech.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Case Farm Equipment - by Jeremy Sweeten. My name is Jeremy Sweeten and I am currently a junior at Purdue University. I am takin a dual major in Agriculture Systems Management and Agronomy. I am from North Central Indiana, Miami County to be exact. My dad teaches for Marion Community School Systems an outdoor lab called Asherwood. We live there to manage the place. They just happen to have a Case 311 with a Triple Range transmission. I grew up mowing, pushing snow, and hauling maple sap with it. In 1986 my parents bought an old,
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
