Re: How do I take this tiller apart to grease the bearings?

Posted by okierob on July 07, 2010 at 21:53:04 from (65.67.203.99):

In Reply to: How do I take this tiller apart to grease the bearings? posted by Will Herring on July 07, 2010 at 19:50:52:

I usually use a wood block and hammer to get it loose. it is right hand thread. i smear a little grease on the shaft and screw it back on.keep the ballbearings dry as they need to be able to roll back once the engine starts. they only engage some cogs to turn the flywheel.

Replies:

• Re: How do I take this tiller apart to grease the bearings? 36 coupe 03:26:45 07/08/10 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]