Posted by Don-Wi on July 04, 2010 at 05:57:54 from (75.207.158.45):
In Reply to: oats hay update posted by Don-Wi on July 03, 2010 at 19:35:26:
We've got an older 5 wheel farmhand style rake, made by Morill out of California. IOt's pretty worn but still works in a good heavy crop and decent in a thinner crop. The oats was just laid right down on the ground though and the wheels just went right over it, not even picking up 1/2.
Borrowed the neighbors newer Gehl 206 6 wheel rake made by Vicon, and holy crap does that thing work nice. It's got the newer style wheels that actually ride on bearings so they stay tight, and the newer style teeth that actually pick up the crop better because they have more flex to them or something. Lots of adjustment on that thing too. even with a 6 wheel rake I was able to rake 2 passes towards each other and they didn't end up on top of each other. That was never possible with our rakes with our 9' machine.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
