|
Tractor Talk Discussion Board |
Re: H rear rims
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by normag on June 18, 2001 at 15:37:41 from (169.207.45.148):
In Reply to: H rear rims posted by Jim on June 18, 2001 at 13:11:28:
IHC model H tractors used several different rim sizes. Most were supplied with 9 x 38, 10 x 38 and some with 6 x 36 (these 36" rims fit the same cast wheels as the 38" rims ). The rims were galvanized, not painted silver. It would be great if you could find a pair of original galvanized 38" rims in good shape for 100 bucks. As I don't see that happening (i'll buy all anyone wants to sell at this price - write me at [email protected]) you have some options. If your's are only rusted at one or two spots of the rim; break them down, cut out the bad area, fit metal patch, weld in metal patch, grind welds flat, prime & paint. Usable used 38" rims, around here, cost $50 - $75 each. You be lucky if these don't have to be cleaned and painted. There are two main shapes for the rim channel (dished and angled). Of course it's best to match the same style rim channel shape on the tractor, although farmers mixed and matched rear rim shapes without worry. John Deere B and several other brands use almost the same 38" rim as the IHC H and can be subsituted if you want. Some ads have new rims available for $230+. My tire man says he can get new rims for $130. I haven't seen these. Has anyone out there seen the $130 new rims ?? what are they like? Are they made in USA? Good luck jim.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
