Your neighbor is your best defense, keep him happy.
Alarms aren't insurance, but there's no reason you shouldn't have a false-free alarm. I owned an installing company for several years, no false alarm problem with properly designed systems. Doesn't mean user error never occured, that's unfortunately common. $300 will buy you an excellent system, $200 will get you most of the hardware you might want. Ebay's a good place to shop. I bought my mother's latest panel there after hers gave out, 20 yrs after I originally installed it.
Making a lot of noise is the most important thing. Not so much to alert your neighbor, but to make the thief nervous. Pay attention to the MO, it's always cautious. When you make your place a lot more trouble than nearby alternatives, you've won.
I live on a mountaintop with a single road up which solves most problems here, but there's also a driveway sensor (no false trips) and a full burglar alarm on the first building (a distance from my house), my well-equipped shop. Alarms are cheap assurance.
MO around here is to drop off the thief to break in and organize the goods (guns, electronics) so that the driver can return for a very quick pickup. Close proximity to the public road is a high risk, making an alarm system well worth the money. Distant neighbors on both sides have had that experience in the past year. I've got a gate at the public road, too long a hike for common thieves.
Yell if you need help determining the system. DIY is simple if you know anything about electricity. There are a few potential problems with hardware that you can easily avoid, particularly with "motion detectors". My shop even got shock sensors on all the walls, to detect any attempt going through them.
My problem was ex-employees coming back, in the middle of the night (gate is usually left open). When I put out the word about what I'd installed, the problem went away. Easier pickings elsewhere.
You are most fortunate with response time, here it's 35 minutes, making central station monitoring almost worthless.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
