Tractor Talk Discussion Board |
Re: 3 Point Hitch Hydraulics - Moving Heavy Clay with Blade
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe Evans on May 29, 2001 at 20:42:03 from (209.41.235.113):
In Reply to: 3 Point Hitch Hydraulics - Moving Heavy Clay with Blade posted by Glen 7580 on May 29, 2001 at 20:22:36:
You have a lack of down pressure on the 3 pt lift arms. The aggregate weight of the blade, its frame, and the tractor 3 pt linkage is all that's holding the blade in the cut. Most 3 pt arrangements I'm familiar with have no down pressure--only lift pressure. Do you have any suitcase tractors weights or something that you can hang on your blade for more dead weight? I've done this with my Kubota. The old cable dozers got their work done by simple massive dead weight of the blade--the cable arrangement offered no down pressure as opposed to newer hydraulic units. I saw a local barn builder that used a mid-sized AC tractor to bore post holes had some sort of z-bar linkage with a two way hydraulic cylinder in place of the standard adjustable top link that you normally see on a 3 pt hitch to give him down pressure in tough ground. It worked very well. You may want to check into this.
Follow Ups:
Home
| Forums
Today's Featured Article -
Show Coverage: Godfrey, Illinois Country Days - by Cindy Ladage. Except for last fourth of July's Old Gold show in Springfield, Illinois, I don't remember when it was so hot. Nevertheless, the heat didn't keep vendors and visitors alike from enjoying the third annual Country Day's Event. Jane Elliott said the event was originally a one man show. "Barry Seiler, owner of Country Town Farm Supply store used to invite people up to the Johne Deere store. He would give hats and a free meal for everyone that brings a tractor." Elliott said while this
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|