|
Tractor Talk Discussion Board |
Re: Starting an old F-12
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Charlie on May 17, 2001 at 09:34:51 from (209.130.133.82):
In Reply to: Starting an old F-12 posted by Shank on May 17, 2001 at 07:38:36:
I've got a F14 which almost the same tractor and they both start the same way. You'll want to be positive its out of gear as your standing in front when it starts. Give it a little gas. You may not need the choke if its warm outside. The main thing is setting the magneto. You retard the magneto (lever turned to the left) to stop the tractor and you need to turn the lever to the right to put it in the correct starting position. However if the magneto is fully advanced it will cause the tractor to "kick like a mule" and that can be dangerous. I back the lever off just a bit and I have never had a kickback. One it starts I push the lever all the way back to the right. When you crank its still the best idea to only pull up for each stroke. If the tractor does kick it will pull the crank out of your hand instead of trying to push it through your and and causing a broken hand. When you crank you should hear the impulse coupling work in the magneto. It will stick once in a while even with proper oiling. I tap on mine with the crank when that happens and it usually will work on the next crank over. If your tractor is in good working order it should start without much effort. They're a good little tractor when you get them running.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|