Posted by Jon Hagen on March 25, 2010 at 08:57:31 from (69.26.23.125):
In Reply to: Re: GPS posted by Nancy Howell on March 25, 2010 at 07:46:44:
Their very helpful, we run a pair of low cost WAAS corrected GPS units (5 years) that are accurate to within 4-6 inches, plenty accurate for our needs, thats even good enough to do soybeans in 15 inch rows.
So slick and easy that you never want to look at a mechanical or foam marker again. We added auto steer to one sprayer tractor a couple years ago, much more accurate than you can drive manually and sure takes a load off the tractor operator on long days. Also gives the driver time to look the sprayer over for plugged nozzles or other problems while the tractor is driving itself arrow straight down the field.
We seed , fertilize , spray and roll 2000 acres using GPS to keep us on line.
I would guess that aprox 75% of area farmers now use GPS in place of markers.
First thing we noticed when using GPS in place of foam markers on sprayers or just an eye ball guestimate with the seeding equipment, was that skips are eliminated and overlap is reduced enough that we got aprox 10% more acres out of a tank of herbicide or a drill box of seed / fertilizer.
We are in prairie pot hole country where it is common for some fields to be cut into several sections by a sloughs or potholes. It is really neat to drive along the road and look at the GPS guided wheel tracks in the field. All the wheel tracks seperated by pot holes or sloughs lineup exactly. Makes it easy to identify the folks that still don't have GPS. ;-)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Two-Brush Generators - by Chris Pratt. Whether for product liability or because the aftermarket parts and labor business is lucrative, this concept is disturbingly prevalent. Fortunately when you step into your shop and make that jump 50 years back in time to work with your old tractor, this concept goes out the window. Even so, when it comes to the charging system, people quickly revert to this idea and start replacing the major components one at a time until it works. The reason you don't find any decals in your replacement set wit
... [Read Article]
Latest Ad:
WANTED IH C200 gas engine — complete running motor Wanted complete used IH C200 gas engine in running condition for an International 574 gas tractor. My block has a hole in it and is dead, so a rebuild kit wont do it — need a whole running motor. The C200 also came in the 544 and 674 gas trac
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
