|
Tractor Talk Discussion Board |
Re: Leak in top of 2N transmission housing
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Salmoneye-Some Guys Have All The Luck... on April 29, 2001 at 04:50:24 from (206.27.102.65):
In Reply to: Leak in top of 2N transmission housing posted by Steve Shelton on April 28, 2001 at 18:48:00:
Go to the link below, and it will show you a picture of what you have. That mysterious cable is the shifter for your Sherman Step-Up Transmission. Pulling that knob gives you 3 more forward gears and one more reverse. All speeds will be faster than your 'normal' gears. Withe the regular tranny in neutral and your foot on the clutch, try pulling the knob out gently and see if you can engage the Sherman. If the cable seems hard to move, spray it with some penetrant and wait a bit. If you break the cable you will have to have one made up for you as they are not available anymore. If it is leaking water in through the cable hole, I would just goo it up good with RTV Silicone and keep an eye on it. Very usefull for speeding from one field to another down the road. :-)
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|