Re: cultivators

Posted by Bryan on April 27, 2001 at 05:43:53 from (207.0.85.158):

In Reply to: cultivators posted by John B on April 26, 2001 at 18:51:50:

John if the cultivator is the old style bolt on ( two peice ) it should bolt right on ( the bolt hole are spaced the same in the frame) if it is the new style quick tach I think that the front pipe is shorter on a B JD ( narrower frame then a A JD). Have the owner of the cultivator measure the width of the tractor frame, between the valve cover and fan, you do the same if they are the same it will fit if it is a quick tach . Good luck Bryan

Follow Ups:

• Re: Re: cultivators John B 07:31:54 04/27/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: cultivators Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]