Not to add any confusion, some other things kind of related about .308's, there seems to be 2 specifications for .308's military with thicker brass and civilian/hunting brass are slightly different. I don't know a heck of a lot about the details but have read a little on it, off the internet, at some point in the past, one would have to really look at the information. I recall that each type of brass was specified by different reference standards, like SAAMI or similar to a ASME, for example. I know that military brass being Berdan primed, is not desirable for reloading and I assume that has not changed. I bought some 1x fired brass from a shop one time that I thought was non military but recall that some of the casings that I filled with powder were almost full, with standard loads for a 130grain hollow point,was using an IMR powder maybe a 3031, I would have to look at the can to see. I was reloading for my springfield m1a, which the mfr does not recommend due to headspace issues, I used the correct die, a special RCBS semi auto die, and form fitted my case to my chamber and had no issues at all. Those rounds grouped quite well and were very effective on whitetail deer, from a rifle really designed for other purposes. Kind off the topic here, but it sure was an interesting one to re-load. I think the seemingly thicker wall brass, I was able to load and use, something was a but odd there. I also recall trying to chamber some factory hunting rounds for this rifle and there was a headspace or similar issue, they would not chamber correctly, of course I realized that there was the potential for this due to the type of rifle it is. One last thing I recall was that the old timer who runs the gun shop, a Korean War veteran and someone who helped close our famous Springfield Armory in '68, told me to avoid certain year military ammo, because it could be M60 machine gun ammo, with higher chamber pressures, I thought all that military ammo was the same, 'cept the M60 which I have fired, contains tracer rounds, same of which I have fired out of this rifle, no idea if they came off a M60 ammo belt or not. I don't really know all the facts on any of this, be it true or not, but there seems to be an awful lot to know or learn, it reminds me of welding, so many different things and variables to consider.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Updatin The Charging System of Your Older Tractor - by Tyler Woods. Older tractors have externally regulated generators or externally regulated alternators, in some instances. That means there is one device that turns energy from the fan belt into electrical energy,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
