|
Tractor Talk Discussion Board |
Re: Wrong Oil
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steve (SC) on April 26, 2001 at 22:06:26 from (216.53.226.114):
In Reply to: Wrong Oil posted by Mike on April 26, 2001 at 20:07:45:
I also had the same problem with an old ford that was from the late '50's I borrowed from my cousin when I first moved here. I had been setting for years and smoked like crazy idling or running. I used regular Pennzoil 10w-40 and gradually it cleared up and stopped smoking (maybe after 10 hrs of running). The rings could be stuck to the piston and just needs a little running but not to hard. Sounds like a good idea to buy the rislone and add it now and run it some and changed the oil. Going to a higher grade like 15-40, or 20w-50 might help also if it is used in high heat and don't stop smoking after a while. If not probably needs new valve seals or rings. Usually if it is the valve seals, it smokes bad at start up. Hope this helps.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|