Waxing Machinery Enamel Finish - a few questions ???

Posted by Alberta Mike on April 18, 2001 at 07:03:56 from (206.75.218.36):

For various reasons, I've always used a reasonably good quality machinery enamel on my tractors. I've applied it by spray or roller for the tinwork, and brush for castings and small parts. I've had pretty good results but like any non-automotive type finish, the paint does get somewhat dull over time (even if it is stored inside or tarped). On the weekend I did a little experiment and used some automotive polish (Turtle Wax) on one panel. Boy, it really brought out a nice shine, looks like a brand new paint job. My question is, will applying wax keep the finish fresher and appearing shiny for any length of time, or will it dull off just like the original paint did? I'm a bit reluctant to do the whole thing if it's going to be a problem, especially if a guy wants to repaint some day. Any comments or suggestions???

Follow Ups:

• Re: Waxing Machinery Enamel Finish - a few questions ??? Al English 09:45:06 04/18/01 (0)
• Re: Waxing Machinery Enamel Finish - a few questions ??? sammy the RED 09:31:25 04/18/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Waxing Machinery Enamel Finish - a few questions ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]