Posted by jd b puller on February 26, 2010 at 19:03:12 from (174.97.178.235):
In Reply to: Welding VS Machining posted by Lanse on February 26, 2010 at 18:44:43:
Hi lanse, nice to see you back...
It all depends on what you want to do 10 years from now. IF you'd like to someday work for yourself, work for a company for 5 years and master various forms of welding, then go out on your own. Portable welding operations are always in demand. Not too many portable machinists (although they do exist). If you go to the jobsite, you can have your own company, and with a fairly small shop, you can do the welding for other people in house.
If you go the machinist route, you'll most likely always be working for someone else unless you borrow LOTS of money to buy some equipment, then you have to keep those machines busy.
A downside to welding is that you have to make sure you keep as much of that welding smoke out of your lungs as possible. Same goes for machining with the coolant, cast iron dust, etc. Both are good jobs. Welding is something you can use at home (especially on tractors).
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Oliver 70 Row Crop - by Staff. The Oliver 70 was part of the "Fleetline Series" and was manufacturered from 1937 to 1948. The row-crop configuration could have either dual or single front wheels. The Oliver 70 was also offered in the standard, orchard and industrial configurations. The tractors were sold in Canada. An early advertisement states "Power when you want it - power when you need it - power to help put in crops when field conditions are right and time and help are limited. That's the power you'll find in an Oliv
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
