|
Tractor Talk Discussion Board |
Re: Re: Re: 12 volt 9N.......HELP!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by River Dale Farms on March 31, 2001 at 14:35:50 from (64.77.138.62):
In Reply to: Re: Re: 12 volt 9N.......HELP! posted by Jim WI on March 30, 2001 at 10:46:43:
Our 12 volt coils for the front distributor Fords do not need a resistor. Yes, all coils are not equal and some need external resistors, but, we work on a lot of tractors in a year and our theory is to do the best job possible with no repeat work for the same situation. Adding a resistor adds to potential future problems with an extra mounting, 2 extra wiring connections, etc., so we do not believe in them, just our method of work, usually simpler is better and generally lasts longer, by the way, we sell ordinary 12 volt, internal resistor coils for $15.85. Dale
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
