Posted by VaTom on February 08, 2010 at 05:27:16 from (216.12.124.38):
In Reply to: Old horse drawn wagon posted by Howard H. on February 07, 2010 at 21:14:54:
Don't know your wagon of course, but wheel joinery is the same as for traditional furniture/fixtures. The rim sized to match the wooden wheel. You need to work backwards. The rim gets heated before application, making a snug fit. Spokes are simply dovetailed. Several choices available for connecting the wheel arcs.
Great project, which will likely make you a much better woodworker. If you have trouble with the curved joinery, a book you should have on your shelf is "Circular Work in Carpentry and Joinery" by George Collings, ISBN 0-941936-22-8. Originally published in 1886, my edition is 1992.
Been several years since I spent a wonderful afternoon with the wheel-maker at Colonial Williamsburg. He was much more knowledgeable than the assistants assigned to talk about furniture. I was surprised at the similarity of construction, never before having looked closely at a wheel.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
