Posted by formerly ny bill on January 30, 2010 at 02:31:00 from (67.242.110.229):
In Reply to: Grazing- Who does it? posted by Don-Wi on January 29, 2010 at 19:44:29:
we have been using grazing since 2001. i was skeptical about turning some of the cropland into pasture, until we bought the farm adjoining ours. that gave us enough total land to raise crops on and still turn some into pastures. there are a number of funding sources that helped with the infrastructure. for example, we are along the river. putting a 35' strip along the river and its feeder streams into crp, paid for a bunch of fencing and a crossing. also since we were fencing off a stream from the cows, we got help with a pond water system for part of the pasture. a multicounty grazing grant paid the bulk of improved lanes to get to the main pastures. another year, there was help for developing an old spring into a dandy watering system for the rest of the pasture fields. the whole thing evolved over 3-4 years. i had already seeded the fields down with ladino clover and orchardgrass. we only let the cows out at night and feed in the barn in the day. morning chores are a pleasure when the cows go out. the mid/late summer milk production is a challenge sometimes because i am slow to adjust for short pastures. in the spring, the pastures definitely grow faster than the cows can eat them, so we bale some of the lots. our water lines are above ground. i talked the nrcs guy down to 4 strand smooth wire around the property line and 3 wires interior. he wanted 5 &4. i told him the cows had been staying in with 1 strand of hot barbed wire. you need the best low impedance fencer you can buy. this is with 120 milkers and about 55-60 acres. hth.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Proflie: John Deere Model R - by Staff. The John Deere Model R, the last of the lettered tractors, was the first diesel-powered tractor produced by John Deere with a gasoline starting engine. It was also the first tractor they produced that had an optional steel cab. The photo above shows the tractor w
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
