Tractor Talk Discussion Board |
Re: Valve stuck! - HELP
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe on March 19, 2001 at 14:11:05 from (63.61.166.73):
In Reply to: Valve stuck! - HELP posted by Tom S. on March 19, 2001 at 07:13:15:
Hey Tom, If you have access to a small air chisle grind off the point or the chisle part or whatever you have so you have just a stub,then make sure you keep plenty of penatrating oil around your valve and just rattle on top of the valve with the air chisle this takes a little practice, because you just want to feather the trigger on the air chisle just so your giving it a good rattle,you don't want to go crazy!This vibration will cause the penatrating oil to get through the rust in a hurry.I've freed many valves stuck to the seat this way nothing will stick a valve like mouse pee.If i can help you anymore,e-mail me. Joe
Follow Ups:
Home
| Forums
Today's Featured Article -
Memories of an IH Super A When I was ? up to 10, I worked on my Papaw's farm in Greeneville, TN every summer. As I grew older (7), it was the thrill of my day to ride or drive on the tractor. My Papaw had a 1954 IH Super A that he bought to replace a Cub. My Papaw raised "baccer" (tobacco) and corn with the Super A, but the fondest memory was of the sawmill. He owned a small sawmill for sawing "baccer" sticks. The Super A was the powerplant. When I was old enough (7 or 8), I would get up early and be dressed to
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|