There wasn't any transmission put into 1980 Chevy pickups that shifted hard enough to need double-clutching. That applies to older HD sliding gear transmissions. Not collar-shifted transmissions like you've got. I assume you've got the Muncie SM-465. Only sliding gear with no synchros is the granny low.
Transfercase, if cast-iron is likely the 205. It does not have near as low a low-range as the chain drive 208 or 241. Cast iron 205 only has a 1.9 to 1 low range. Aluminum 208 has 2.6 to 1 in low, and the 241 (replaced 208 in 1987)has 2.7 to 1 in low.
As to gear oil, the 90W versus thinner Dextron has nothing to do with being heavy duty, or not. If that were true, there would be an alful lot of hugh HD Allison industrial transmissions blowing up.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
