Re: advance camshaft

Posted by Al English on February 25, 2001 at 16:59:09 from (24.30.29.47):

In Reply to: advance camshaft posted by john r on February 25, 2001 at 13:55:49:

Hi john, 6.7 degrees would normally be quite a bit of change. But, Wardner is right, you're talking about 13.33 CRANKSHAFT degrees! That is really a lot. Getting an improvement from that drastic a change would indicate some major design flaw in the original set-up. Without trying this on a dyno, or talking to someone who has, you're in uncharted(and dangerous) waters. I am not familiar with your engine, but in many engines this much change in cam timing would have the pistons hitting the valves. Unless you have a specific reason for wanting to make this change, and know for sure this is an effective proven fix, don't do it. Good luck...Al English

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: advance camshaft Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]