Posted by Fixerupper on December 29, 2009 at 13:40:51 from (207.177.13.178):
About five pages back I posted about the gas sediment bowl hole plugging on the 630. Well, Armand was right, it was pieces of float that was giving me a fit. I had replaced the fuel gauge sensor back when Deere still carried them ( how many years was that?) but I had to get a gauge and sensor package with a gauge that did not look stock. The sensor has an adjustable length arm and the set screw simply came loose and let the float end of the arm go. The float is a kind of foam type stuff instead of cork, and it's been banging around in the tank enough to break off a few chunks.
The good side of this is the sensor and gauge still work, I thought the gauge had given up the ghost cause it wasn't registering anymore but I guess it won't register if there's no float on the end of the arm. That really made my day cause working gauges are as scarce as hen's teeth. Jim
Oh yes, the bowl does have a little riser that sticks up in the tank, but it's not very tall and it has a couple of slits in the side.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
