Re: DEARBORN CORD WOOD SAW

Posted by JoeK on February 08, 2001 at 15:03:51 from (209.206.208.110):

In Reply to: DEARBORN CORD WOOD SAW posted by PHILIP SEARCY on February 07, 2001 at 11:44:51:

Does this mount on end,or middle of blade shaft?Its been a few yrs since I've seen one.If an end mounted steel pulley,you might find one at a machinery junkyard on a blower,threshing machine or such.Diameter should be the same as original or blade speed will be affected.Keep in mind these saws are a VERY dangerous tool and any modifications from specs could increase danger.In the days "buzz saws" were in common use it was not uncommon to know someone who had been hurt by one.I have cut countless cords of firewood with these in the past and do not condemn them,just have a very strong respect for the danger factor.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: DEARBORN CORD WOOD SAW Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]