|
Tractor Talk Discussion Board |
Re: Blow steam whistle with air
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Allen at Catfish Hollow on February 02, 2001 at 21:04:56 from (207.44.56.232):
In Reply to: Blow steam whistle with air posted by Robert in Md. on February 02, 2001 at 19:24:55:
A 5 inch whistle was designed for a 250hp+ boiler, so you better have a really BIG receiver to blow it on air. (something like 150 gallon, though the bigger the better) The problem isn't pressure, its the volume.
Most vintage steam whistles don't have packing because it tends to cause the valve to drag and not seat quickly...the stem is on the discharge side and doesn't need to retain pressure when the valve is seated (closed). Eliminating packing on the valve simplified the design, cut manufacturing costs, and improved the action all at once....
The only real reason to put a new bushing or guide in would be if the valve was worn so badly that it no longer seats correctly. Don't expect the whistle to sound nearly as good on air either. most steam whistles sound thinner and thready on air (while, conversely, air whistles will get funny undesirable overtones (minor and modal harmonics) on steam).
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Fabricating Sidesheets - by Chris Pratt. The easiest and best first-time project for wanna-be sheet-metal workers like myself is flat or nearly flat metal cut and drilled to be a tractor's sidesheet. A sidesheet is sheetmetal to cover either the engine as in the case of early Oliver's, Massey-Harris' and many crawlers or the wiring and electrical components as in the case of the Massey-Harris Pony, Allis Chalmers' D Series (D-14, D-15, D-12, D-10, D-17, and D-19). The need for fabricating becomes obvious when you go to buy any of these
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
