Posted by NCWayne on November 06, 2009 at 13:57:20 from (173.188.168.35):
I'm looking for a carb part for a customers IH 2000 industrial tractor (supposed to be the same as a 2424 tractor I'm told). The carb is a Marvel Schebler TSX-896 and what I need is the main nozzle. The basic rebuild kits are easy to get but I'm having no luck so far finding either a nozzle alone or find it in a more complete rebuild kit. As it stands now his came unscrewed and got itself sucked up and lodged under the intake valve on #2. How the that engine was sucking hard enough to pull a piece of brass up out of the carb and at exactly the right angle to get it where it did is a mystery to me. He did say that when it quit running it was after it had "run away" with him so I know the engine was at FULL throttle and drinking all it could drink. Even then I wouldn't have thought it would have had enough suction to pull the nozzle up and in like that.
I might be able to get his straightened out and get the threads fixed in order to reuse it, if I have to, but would rather find a new or good used one if possible.
Anybody have one or know where I can get one it would be greatly appreciated. My email is Nota55nomad@ctc.net Thanks, Wayne
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
