Hire it done. You'll cut the harvester a check when he's done and it's over with. No arguments over what to fix, who used it more, no arguments that the hydro went out cause someone's field is hillier, softer, muddier than the other person's, and no static from the two wives (yes, I've seen it).
Combines cost a bunch of money to keep maintained. A bearing goes out, wears the shaft, the shaft breaks, goes cockeyed, throws a chain off the sprocket, chain wraps and bends another shaft. You go to the salvage yard thinking you'll save money only to find every combine is missing that shaft cause they all break. Dealer wants $500 for a new one. This is a very real story.
If you still want to do your own harvest, buy one yourself and keep it in good shape. Do you have the knowledge it takes to run it right? There's a farmer around here who does his harvesting with an old 403 International, and the job his machine does puts a new combine to shame. He's a darned good mechanic and he knows how to run it right. Are you up to it? Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.