The 970 seems to work just fine for us. It replaced an old Rex wagon that my dad bought used in the early 80's. That thing was worn out and wasn't worth trying to keep the gearbox together, so we parked it.
A few years later I tore it apart, and now the running gear is under a Meyer's wagon (busted that gear box last year) and the stringers are a part of a haywagon now.
We bought a 920 last year at my 2nd cousins estate auction. Paid $400 for it, and that was the highest priced one of the 4 gehls he had (a 910, and I think 3 920's. This was the first to go in the line up which we knew would be more $$$, but I knew something nobody else at the auction knew- It had a brand new apron chain installed a few years prior. My dad and I went and scoped them all out, and by looking at the chain we determined that this was the one with the new chain so we were pretty determined to get it.
While doing corn last year the steel over the apron drive shaft caught the chain and tore up a couple bars, but we fixed that and lined the floor in poly. Replaced the steel over the shaft, and all the steel in the front for the cross conveyor. Heck of a wagon now, just took a little more $$ to get it there. Still much cheaper than buying from a dealer.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Ford Part Number Trivia - by Forum Participants. "Replaced by" means the part was superseded. All of my part books date back to 1964 and New Holland have changed some part numbers. They usually put the old Ford part number on the package. I was suppressed when I looked up the part number of the auxiliary drive shaft because for some reason the part number went through a radical change and it lost its "Basic Part Number". Ford part numbers follow the following rules. Most part numbers are in three parts. The middle part is called the
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
