Jewelers rouge comes in different colors.White,red or green is what you want.Then take some lacquer thinner and break a piece of a stick of jewelers rouge and mash it some way into the lacquer thinner until you have it all mixed and suspended in the lacquer thinner.Then put it in a bottle you can shake and get a towel or some cotton cloth even socks,shake,Put a little on your rag,rub it on the aluminum until it turns black,wipe off with a clean rag.That will shine it up fast.Mothers aluminum polish and a polishing ball on drill works after you get it cleaned up good,or Never-Dull.There is green and white aluminum polish already mixed that you can buy but its expensive.Jewelers rouge and lacquer thinner is not real cheap either for that matter.Jewelers rouge cuts through oxidation better than anything I know about.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
