Re: MM ZA spark plug wires help

Posted by El Toro on September 08, 2009 at 06:27:00 from (74.103.74.187):

In Reply to: MM ZA spark plug wires help posted by Joe Pro on September 07, 2009 at 19:11:40:

You would need to remove No1 sparkplug near the radiator and bring No1 piston to TDC on the compression stroke. Once you're at tdc both valves should be closed & your timing marks should be aligned. Pull the cap and see where the rotor is pointing. That's your No1 plug's firing position. You should have the cap off when bringing No1 piston to tdc so you tell which direction the rotor turns. Your firing order is 1-3-4-2 and they need to go on the cap in this firing order whether it rotates CW or CCW. If you didn't have the distributor or mag off the engine it should start. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]