Posted by dave2 on July 17, 2009 at 12:09:08 from (91.10.158.61):
Had to pick up about 5 ton of grass pavers today and a hedge trimmer I ordered from a Big Box store. 4 pallets @1.25 ton each. while we were paying, an older kinda snooty couple were haggling about a delivery. Didn't want to pay 20 bucks to have something delivered, didn't have a hitch on their Mercedes to use a free trailer etc. We had a borrowed truck and my wife had my KIA w/ hitch and were going about the same direction so had them load their stuff on the trailer and the wife pulled it to their place. Helped unload it also cause the people didn't seem to have any friends. Took the trailer back and came home. The people never even thanked her, just like we owed them.. Must be a miserable life. Then, I had arranged for the guy at the sawmill in town to download the pallets so I could get the truck back sooner and pick up the stones w/ my tractor and trailer (several trips). While I was their waiting on him, the neighbors were moving some stuff w/ an all terrain forklift. Saw what I was going to do and had me drive the truck to where I wanted them (couple of stalls outside of town) and they unloaded and set them right where I wanted them. Tried to pay and the guy waved and drove off. Seen and waved at this guy for 10 years and never talked with him.
Then, got home a little bit ago and opened up the new hedge trimmer I got that I new was made in china, and it was stamped on the machine and printed all over the box "made in Germany". Not USA, but better than china.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
