Re: hydralic cylinder

Posted by ROBERT on November 10, 2000 at 16:38:07 from (205.188.192.179):

In Reply to: hydralic cylinder posted by Bruce on November 10, 2000 at 15:07:41:

if there is a smap ring on the rod gide that can be removed there is probly another one.
if this cyl is made lick a JD148 bucket cyl
after removing the first one now tap the rod gide
in to the tub (be caful not to deing the rod.
you will push it in about 1/2" and you will see another snap ring,remove it than pull the hole thane out.
ROBERT

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: hydralic cylinder Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]