|
Tractor Talk Discussion Board |
Re: Re: Re: NOT CHANGING ANTIFREEZE REGULARLY
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jon Hagen on October 22, 2000 at 17:37:27 from (63.160.195.23):
In Reply to: Re: Re: NOT CHANGING ANTIFREEZE REGULARLY posted by Ken McWilliams on October 22, 2000 at 15:40:11:
Good points Ken, The info I posted came from diesel engine companies service book's. That EG antifreeze does turn acid with age I know is true as I use the test strips to check for acid level and I use the alkaline additive to bring the PH back to spec. I understand your comment about EG not having any sulfur in it so where does the sulferic acid come from? Do we have a chemist on here who can help us out? And the rust and flake off process to causing sleeve pitting is not strictly from detonation vibrating the rust flakes off, as you say it is cavatation bubbles forming and collapsing on the cyl surface causing the erosion by directly eroding the metal or by scouring off a rust flake that formed on that spot. Most of the diesel cooling additives have not only materials to neutralize acid but somthing that I can describe as a slime layer that coats the surface of the cooling system to prevent rusting or other corrosion and stop cavation bubbles from acting directly on the cyl wall surface.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Ford Part Number Trivia - by Forum Participants. "Replaced by" means the part was superseded. All of my part books date back to 1964 and New Holland have changed some part numbers. They usually put the old Ford part number on the package. I was suppressed when I looked up the part number of the auxiliary drive shaft because for some reason the part number went through a radical change and it lost its "Basic Part Number". Ford part numbers follow the following rules. Most part numbers are in three parts. The middle part is called the
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|