|
Tractor Talk Discussion Board |
Re: jd d governer shaft and fan shaft
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by clooney on October 15, 2000 at 05:01:19 from (208.214.90.103):
In Reply to: jd d governer shaft and fan shaft posted by danny on October 14, 2000 at 21:44:08:
Danny, first off what is frozen up, the fan shaft or the governor or both? Remove the mag. & try to move the governor shaft to see if there is free play in the governor shaft (should be able to turn 1/16"+ in each direction. If the fan shaft is frozen then the hood, gas tank, radiator & water/fan bearing stand will have to be removed. If it is the governor only then it can be unbolted & slid out to the rear. The bearings are not too hard to change but there are backlash & timing concerns to deal with, make sure you keep ALL the gaskets that are between the fan & governor (tag for location) & the l/h governor cover gaskets because they are shims to control gear line-up & backlash. But if you are restoring the tractor it should all come apart anyway including the engine, transmission & governor as there are probably pitted & worn parts & bearings throughout the whole tractor.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Revival of a John Deere Combine - by The Red, John Fritz. For several years I had been driving by a farm house on the west side of Indianapolis that had a John Deere combine parked in high weeds in a lot behind the house. The gentleman no longer farmed because the entire area was developed with housing and light industry. I had stopped several times and knocked on the door but no one would answer. My curiosity was up and I wanted to contact the owner. I wanted to see what he planned to do with the combine.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
