Re: Reverse Fan

Posted by Ken McWilliams on October 07, 2000 at 10:13:14 from (205.188.199.57):

In Reply to: Reverse Fan posted by mike on October 07, 2000 at 06:08:15:

Mike,

Assuming the tall weed situation is only temporary, fabricate a box around the front. Make the box out of plywood or sheetmetal. Leave about 6 - 8 inches from the front of the grille to the inside front of the box. The box could be closed on the bottom, 2 sides and front. Leave it open at the top.

Another suggestion is to fabricate a "U" shaped extension out the front of your tractor to push the weeds over before getting to the tractor. Just c-clamp it to the frame or front axle.

I mow my neighbor's (an elderly widow) field about once a year. I will use my front loader and run it about 12" - 18" of the ground. This keeps the seed heads of the weeds from clogging my radiator.

Ken McWilliams
Dayton, OH

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Reverse Fan Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]