Re: A HOMEMADE DISK - A POSSIBILITY???

Posted by Fred OH on September 21, 2000 at 06:45:05 from (208.32.116.50):

In Reply to: A HOMEMADE DISK - A POSSIBILITY??? posted by Weekend Farmer on September 20, 2000 at 11:53:09:

Heres you a better idea. Buy a larger used one and cut it down to fit your tractor and needs. If the shafts need shortening, do it on the head end so you won't have to rethread other end. Weld up all the notches on the shaft and grind down. You will have extra cutters and bearings for spares and it will be a lot easier project. And if you are a small time user, it should last you a lifetime. L8R----Fred OH

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: A HOMEMADE DISK - A POSSIBILITY??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]