Trying to identify backhoe bucket

Posted by bkahler on May 09, 2009 at 18:10:50 from (12.213.80.50):

I recently picked up a really nice 12" backhoe bucket that I need to identify.

The upper holes are spaced 8-1/8" apart (inside) and the lower holes are spaced 5-1/8" apart (inside). The distance between the upper and lower holes is 14". The top holes are 1-3/4" in diameter and the lower holes are 1-1/2" in diameter.

I had hoped to use this on my Case 530 backhoe but the upper hole spacing is to small and the diameter is to large.

I'm either going to have to modify it to fit my 530 or else trade/sell it and get the right one.

Any ideas on what this bucket might fit?

Thanks,

Brad

Replies:

• Re: Trying to identify backhoe bucket Jim in N M 07:35:57 05/10/09 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]