Re: john deere

Posted by Scott Green on September 14, 2000 at 03:20:19 from (209.130.130.206):

In Reply to: john deere posted by clive on September 13, 2000 at 17:18:06:

At one time , we use to have a Farmall "H" and a Massey Harris that did the same thing. We had to line up the nuturals also. The problem was that the knob at the end of the shifting lever was wore. This knob needs to be built back up to fit the track it travels through when shifting gears. It's probably wore kind of round , which causes it to slide inbetween the different chanels , instead of through them. The knob should look kind of square / rectangle , with the sharpness taken off the corners.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: john deere Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]