Re: Yoke stripping out at the shaft

Posted by steve from mo on September 08, 2000 at 06:42:06 from (168.166.54.10):

In Reply to: Yoke stripping out at the shaft posted by IRRITATED on September 08, 2000 at 05:19:00:

Offhand, I would have to say the pump shaft is not aligned with the shaft that drives it, putting excessive stress on the yoke and CV/universal joints. Another possibility is that a bearing is out in the pump or on the shaft causing the same problem.

It would be better if we knew what kind of equipment we were talking about here so the real experts could give you the benefit of their experience.

Follow Ups:

• Re: Re: Yoke stripping out at the shaft IRRITATED 19:10:53 09/08/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Yoke stripping out at the shaft Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]