Thanks for the replies. I was hoping maybe somebody else out there had an IH hoe.
I'm well aware of how screwy and odd-ball some hose ends can be. My 1964 Ford backhoe has all British hose ends which are close to impossible to find locally. So, I bought special adapters.
But, I'm not familiar with these IH backhoes. Appears to use JIC swivels, but I'm just guessing. I wish I had it here to take apart. I guess I could go to my neighbors machine, and take one of his hose ends off, drip oil all over his yard, and get his wife ticked off at me.
Buying the new generic premade hoses is not a problem. Just the adapter fittings. I've found that buying premade hoses with male pipe thread ends is often 1/4 the cost of having special hoses made. Just have to figure out what adapter fittings I'd need to make them fit. I know they are 1/2" hoses and also know the lengths. Just the ends are the issue here.
Many tractor companies give full specs for their parts now, on line. But not IH industrial, which comes from Dresser or Komatsu now. All they use is the old IH catalogs with part #s only.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
