Re: 446 Case ?????

Posted by Doug A on August 12, 2000 at 18:43:42 from (205.188.199.203):

In Reply to: 446 Case ????? posted by Marty Ruvolo on August 10, 2000 at 17:48:35:

The loader and backhoe tractor was a seperate model and they were not detachable.As far as I know no one makes a loader or hoe for a 446 or any other Case or Ingersoll garden tractor. To put a tiller on your tractor you must have a sleeve hitch(cheaper) or a three point hitch to lift and carry it.You must also have a hydraulic pto kit installed to run it.Cases rear mounted attchments are hydraulic driven.Front weights are needed when a tiller is installed.All of this stuff is still available from Ingersoll but be prepared for sticker shock. Doug A

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 446 Case ????? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]