|
Tractor Talk Discussion Board |
Re: Mounting Tractor Tires
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Scott Green on August 06, 2000 at 06:59:54 from (209.130.148.33):
In Reply to: Mounting Tractor Tires posted by Mark from Genoa, NY on August 05, 2000 at 16:53:37:
Mark , I agree with the other 2 postings "IF" you can get a tire changed for $20.00-$25.00. I doubt a tire company would even look at you for that kind of money in NY State. I shopped around when buying new tires for one of my tractors. Even with buying the new tires , it still cost me $100.00 per tire to get them changed. So for $20.00 , I don't think so. I had the new tires installed for the guarrantee of no leaks , which is always possible. I have changed and repaired many tractor tires of my own. Here is what you do: (1.) empty the tire. (2.) Jack the tire up off the ground. (3.)useing a digging bar about 6-8 feet long with a flat nose on it , break the beads by forcefully jabbing the bar where the tire meets the rim. (4.) use tire irons to take the tires off the rim. You may be able to use big screw drivers. If you want to load your tires with liquid , figure out how much your tire will hold. With the tire off the ground , and the valve stem up to the top , lock your tire brake. put a 55 gallon drum at a level higher than your tractor tire. Connect a hose from the drum to the valve stem. Make sure you have no loops , dipps , or kinks in the hose. Put your solution in the drum and leave. Go do something else. The next day your tire should be filled. Then do the same for the other tire. If your tire isn't filled the next day , it is because you had a loop , dipp , or kink in the hose. This is important , because the air needs to get out. If air gets trapped in the hose , the transfer of liquid is stopped. The garden hose to valve stem adaptor can be purchased at your local farm store. I bought mine at Central Tractor.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
A Tinker�s Guide to Manifold Repairs - by Curtis Von Fange. A common characteristic of keeping older equipment is that some parts to make repairs can be extremely difficult to locate. For example, finding a replacement for a cracked intake or exhaust manifold on a unique tractor or odd brand can be a frustrating and downright impossible mission. So, what is an alternative solution to scraping out that �one of a kind� piece of history? First, decide if you are one to try a repair yourself or have someone else do it. If you are uncomfortable about
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|