Re: Re: MAGNETO PROBLEM - and a couple of questions ????

Posted by Alberta Mike on August 02, 2000 at 18:21:17 from (207.153.51.114):

In Reply to: Re: MAGNETO PROBLEM - and a couple of questions ???? posted by clooney on August 02, 2000 at 17:50:03:

Clooney: Took the thing apart as you suggested. The point setting looked good, so I dressed the point surfaces with some wet/dry paper and cleaned them with electrical contact fluid. Also tightened down 2 screws from the outside that held the big transformer (or whatever it is, maybe an electromagnet) in place (it was loose). Then I tried your tip for the test and I got spark at all 4 terminals. Then did it with a plug wire and a plug and it looks good, a nice hot-looking spark. Now if I only had a running tractor to use it on. Thanks for the help.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: MAGNETO PROBLEM - and a couple of questions ???? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]