Re: Tilt cylinder leaking

Posted by Tyler(WA) on July 18, 2000 at 07:36:12 from (12.13.226.15):

In Reply to: Tilt cylinder leaking posted by Randy on July 17, 2000 at 21:19:27:

New seals in a worn out front plate, will still leak. I have my hydraulic shop measure the tollerances of my front plate before I put new seals in. They can get me a new plate if it's too far gone. Often, the shaft can get to rubbing on the sides of the opening and the new seals won't fill the gap. It doesn't take much.

Another thing to check is that you have the seals in correctly. Sometimes there is a wiper that strips off the hydraulic fluid prior to the O-rings. If that's backwards, it can leak badly.

Good luck.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Tilt cylinder leaking Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]