You need to let the ground set after plowing, let it get a rain on it or let it dry out a few days, it'll work better then.
I've talked with so many customers that are saying the same thing you are saying. I wouldn't have a disc my self. Very few of the big farmers even use them any more.
I built a small 4-6ft field cultivator and it does a much better job. I have an extra one if you're interested! The field cultivator will draw themselves into the ground and not just roll over the top. Sometimes you have to make more than one pass, just depends on soil conditions.
I can guarantee you this, if you use a field cultivator you won't use a disc any more unless you need something to cut up vines like in a pumpking patch or pickle patch!! The field cultivator won't leave unevenness in the field either. Each pass looks just like the last one.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Can You Patch a Tire Sidewall? - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "Has anyone attempted (or succesfully) glued or bolted a patch to the tires' sidewall. I cannot afford a tire right now but have some horse stall mat material and could buy some glue. I could use some advice on
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.