Tractor Talk Discussion Board |
Re: Add weight to front end on 8N
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by chuck on July 06, 2000 at 19:45:36 from (205.188.193.162):
In Reply to: Add weight to front end on 8N posted by Tom Glover on July 04, 2000 at 06:05:30:
Are the front wheels lifting while mowing or while carrying the mower up off the ground? If, while mowing, then maybe you need to loosen the top link, so that the lower links are supporting the front of the mower and the tail wheel is carrying the rest of the weight. The hitch on some mowers provide a toggle where the top link attaches, if your's doesn't you could use a lenght of chain instead of the top link, it will allow more flexibility between the tractor and mower. Sometimes, if mowing really bumpy ground I unhook the top link so that the mower will be able to follow the ground.
Follow Ups:
Home
| Forums
Today's Featured Article -
Ford Part Number Trivia - by Forum Participants. "Replaced by" means the part was superseded. All of my part books date back to 1964 and New Holland have changed some part numbers. They usually put the old Ford part number on the package. I was suppressed when I looked up the part number of the auxiliary drive shaft because for some reason the part number went through a radical change and it lost its "Basic Part Number". Ford part numbers follow the following rules. Most part numbers are in three parts. The middle part is called the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|