Posted by Mark on March 03, 2009 at 06:00:51 from (172.129.63.228):
In Reply to: O/T old ammunition posted by Nancy Howell on March 03, 2009 at 03:57:02:
That ammunition is still new for all intents and purposes.....really!
I had a friend call me a few years ago and offer me a can of "old army shells" as he called it. Seems his uncle had hoarded it, the uncle had died and they wanted the ammunition gone.
I went to retrieve what I assumed would be a box of assorted junk and was overjoyed to be handed a full military can of fresh M1 Ball ammo, all in Garand clips and bandoliers, dated 1957.
I promptly ran it all through my two M1"s with nary a hiccup.
When I was much younger....about 35 years ago, I was looking for some 38 WCF (38-40) ammunition so I could use an old family heirloom ("92 Winchester) that deer season. There was an elderly man in the village that told me to come see him...he thought he had some ammo. I went to see him and he pulled out an old Roi Tan cigar box and dug out 16 cartridges (cat"ridges as he called"em). This was around 1974 and he told me he had owned a rifle like the one I was using, back around 1915! The shells were "just" 59 years old then...assuming they were made in 1915...they could have been older. needless to say, I scooped them up and went to try a few out before opening day. Those cartridges were loaded by UMC (Union Metallic Cartridge Co.) with black powder, in what is known as "balloon head" cases. They even had copper primer cups. That ammunition is quite collectible nowadays. Every single one of them worked as good as the day they were made. I regret that I didn"t save a couple...but I was young and foolish then and had no idea such things were rapidly disappearing.
As for corrosive primers: Most of them disappeared by the late 1930"s, although Uncle Sam continued to use them until the early 1950"s in everything EXCEPT 30 carbine ammo which was always loaded with non corrosive primers and ball powder.
Corrosive primers used potassium chlorate...which when fired, became a chloride....a salt in other words. This being very hygroscopic, drew moisture and rusted the barrel. Non corrosive primers utilize lead styphanate which leaves no harmful residues behind.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
