Posted by DickL on February 16, 2009 at 15:58:48 from (76.76.33.112):
In Reply to: Re: Penetrating Oil posted by ScottyHOMEy on February 16, 2009 at 15:11:29:
Penetrating oil is a very useful tool but you would not use it to wash out your eye. I use it all the time Scotty. Thanks for the complement also Scotty. A bolt that screws into a taped hole or into a nut has clearance. If there is no gasket to stop the flow it (penetrating oil) will enter that clearance and lube the threads. Some brands have and acid that will help dissolve rust as it seeps into the clearance. Without clearance it would be a press fit and would remove the threads or twist off when trying to screw it in. A tapered pipe plug would be tight when it enters far enough to have no clearance. When the clearance is gone nothing will get past the threads. I understand the not hurt part as long as it is not in your eye.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want � unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Wanted to buy model 65 massey ferguson 65 diesel
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
