Re: Stuck Telescoping Shaft

Posted by Wardner on June 02, 2000 at 17:55:02 from (63.23.215.42):

In Reply to: Stuck Telescoping Shaft posted by Mike on June 01, 2000 at 02:59:25:

I just unstuck a PTO shaft with my two ton forklift. I took out the grease fittings on the U-joints and slipped nylon slings through each end. One sling was attached to a fork and the other on the bottom of the mast. I thought I was going to shread the slings but it did pop loose without any damage to anything. It bound up because the inner solid shaft had a slight camber. I whacked it with a 10 pound hammer and everything now slides good.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Stuck Telescoping Shaft Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]